manualshive.com logo in svg

Datalogic Gryphon I GFS4400, Product Reference Manual

The Datalogic Gryphon I GFS4400 is a fixed-mount barcode scanner offering superior performance. Ideal for streamlined operations, enhance your device's utility by accessing the Quick Reference Manual. Download the manual for free to explore full features and troubleshoot with ease. Available exclusively from 88.208.23.73:8080.

Share
Download
background image

Product Reference Guide

1

Table of Contents

INTRODUCTION ................................................................................................................................................................................ 9

About this Manual  .......................................................................................................................................................................................... 9

Overview .................................................................................................................................................................................................................................................... 9
Manual Conventions  ...........................................................................................................................................................................................................................10

References ..................................................................................................................................................................................................... 10
Technical Support  ........................................................................................................................................................................................ 10

Datalogic Website Support ...............................................................................................................................................................................................................10
Reseller Technical Support ................................................................................................................................................................................................................10
Telephone Technical Support ..........................................................................................................................................................................................................10

About the Reader  ......................................................................................................................................................................................... 11
Programming the Reader  ............................................................................................................................................................................ 11

Configuration Methods ......................................................................................................................................................................................................................11

SETUP .............................................................................................................................................................................................. 13

Unpacking ..................................................................................................................................................................................................... 13
Setting Up the Reader  .................................................................................................................................................................................. 13
Attaching Reader to Host ............................................................................................................................................................................. 14
Interface Selection  ....................................................................................................................................................................................... 15
Custom Configuration Settings ................................................................................................................................................................... 18

Configure Interface Settings  ............................................................................................................................................................................................................18
Global Interface Features ...................................................................................................................................................................................................................18
Configuring Other Features ..............................................................................................................................................................................................................18
Software Version Transmission  .......................................................................................................................................................................................................18
Resetting the Product Configuration to Defaults .....................................................................................................................................................................19

CONFIGURATION USING BAR CODES............................................................................................................................................ 21

Configuration Parameters .................................................................................................................................................................................................................21

GLOBAL INTERFACE FEATURES .................................................................................................................................................. 23

Host Commands — Obey/Ignore  .............................................................................................................................................................................23

RS-232 Only Interface............................................................................................................................................................. 25

Baud Rate ...........................................................................................................................................................................................................................26
Data Bits  .............................................................................................................................................................................................................................27
Stop Bits ..............................................................................................................................................................................................................................27
Parity ....................................................................................................................................................................................................................................28
Handshaking Control  ....................................................................................................................................................................................................29

RS-232/USB-Com Interfaces................................................................................................................................................... 30

Intercharacter Delay .......................................................................................................................................................................................................31
Beep On ASCII BEL  ..........................................................................................................................................................................................................31
Beep On Not on File  .......................................................................................................................................................................................................32
ACK NAK Options  ............................................................................................................................................................................................................32
ACK Character  ..................................................................................................................................................................................................................33
NAK Character ..................................................................................................................................................................................................................33
ACK NAK Timeout Value ...............................................................................................................................................................................................34
ACK NAK Retry Count  ....................................................................................................................................................................................................34
ACK NAK Error Handling ...............................................................................................................................................................................................35
Indicate Transmission Failure  .....................................................................................................................................................................................35
Disable Character ............................................................................................................................................................................................................36
Enable Character  .............................................................................................................................................................................................................36

USB Keyboard Settings .......................................................................................................................................................... 37

Country Mode  ..................................................................................................................................................................................................................38
Send Control Characters  ..............................................................................................................................................................................................42
Intercode Delay  ...............................................................................................................................................................................................................43
Caps Lock State ................................................................................................................................................................................................................43
USB Keyboard Speed  .....................................................................................................................................................................................................44
USB Keyboard Numeric Keypad  ................................................................................................................................................................................45

USB-OEM Interface ................................................................................................................................................................. 47

Summary of Contents for Gryphon I GFS4400





































































































































































































































































































































Reviews:

No comments

Related manuals for Gryphon I GFS4400

Vanderbilt VR4 S-MF Series Installation And Mounting Instructions preview
VR4 S-MF Series
Brand: Vanderbilt Pages: 24
Barnes & Noble Nook BNRV350 User Manual preview
Nook BNRV350
Brand: Barnes & Noble Pages: 106
HID iCLASS SE Installation Manual preview
iCLASS SE
Brand: HID Pages: 2
Silvercrest 92308 User Manual preview
92308
Brand: Silvercrest Pages: 58
Samsung SSA-R1003 Quick Manual preview
SSA-R1003
Brand: Samsung Pages: 36
Sony Reader PRS600R Quick Start Manual preview
Reader PRS600R
Brand: Sony Pages: 2
Sony PRS300R Setup Manual preview
PRS300R
Brand: Sony Pages: 1
Sony PRS-950 - Reader Daily Edition&trade Specifications preview
PRS-950 - Reader Daily Edition&trade
Brand: Sony Pages: 2
Sony PSR-600 Quick Start Manual preview
PSR-600
Brand: Sony Pages: 8
Sony PRS-650RC - Reader Touch Edition&trade Specifications preview
PRS-650RC - Reader Touch Edition&trade
Brand: Sony Pages: 2
Sony PRS-900 - Reader Daily Edition PRS-900BC - Reader Daily Edition PRS-900 Specifications preview
PRS-900 - Reader Daily Edition PRS-900BC - Reader Daily Edition PRS-900
Brand: Sony Pages: 2
Sony Reader Quick Start Manual preview
Reader
Brand: Sony Pages: 14
Sony Reader PRS-T2 Service Manual preview
Reader PRS-T2
Brand: Sony Pages: 20
Sony PRS-950 - Reader Daily Edition&trade Service Manual preview
PRS-950 - Reader Daily Edition&trade
Brand: Sony Pages: 20
Sony PRS950BC User Manual preview
PRS950BC
Brand: Sony Pages: 43
Sony Reader PRS-T1 User Manual preview
Reader PRS-T1
Brand: Sony Pages: 51
Sony Reader PRS-T3 Series User Manual preview
Reader PRS-T3 Series
Brand: Sony Pages: 173
Sony PRS-950 - Reader Daily Edition&trade User Manual preview
PRS-950 - Reader Daily Edition&trade
Brand: Sony Pages: 180

Brands by name

Popular brands

Load more brands