Configure the Base Station
2
Gryphon™ I GM4102
Changing the Base Station Position
The base station is configured by installing one of two
sets of mechanical parts that come with the cordless kit.
The default mounts (shown below) provide three options:
vertical (wall) mounting, standing (45°), or horizontal
mounting with a higher mechanical retention of the scan-
ner. Use the other mounts only for horizontal mounting,
with lower retention of the scanner. The different parts
may be interchanged to customize retention preferences.
1.
Insert the appropriate parts for the desired base
station position, as shown below.
2.
Using your thumbs, push open the plastic tabs
on the bottom of the base to free the wing hold-
ers.
A tool such as a rigid pen or a flat screwdriver
can be used to change the mounts. Do not
allow it to touch the contacts.
Standing,
Horizontal
Horizontal
or Vertical
Only
