Programming
28
Gryphon™ I GM4102
Using the Programming Barcodes
This manual contains barcodes which allow you to recon-
figure your reader. Some programming barcode labels, like
the
Standard Product Default Settings on page 28
only the scan of that single label to enact the change.
Other barcodes require the reader to be placed in Pro-
gramming Mode prior to scanning them. Scan an ENTER/
EXIT barcode once to enter Programming Mode, scan the
desired parameter settings, then scan the ENTER/EXIT
barcode a second time to accept your changes, exit Pro-
gramming Mode and return the reader to normal opera-
tion.*/9-
Configure Other Settings
Additional programming barcodes are available in the Gry-
phon™ I GD4102/GM4102 PRG to allow for customizing
programming features. If your installation requires differ-
ent programming than the standard factory default set-
tings, refer to the PRG.
Resetting Standard Product Defaults
If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want the fac-
tory settings restored, scan the Standard Product Default
Settings barcode below to copy the factory configuration
for the currently active interface to the current configura-
tion.
Factory defaults are based on the interface
type. Configure the reader for the correct inter-
face before scanning this label.
Standard Product Default Settings
