Quick Reference Guide
5
Connecting the Base Station
Figure 1 shows how to connect the Base Station to a ter-
minal, PC or other host device. Turn off the host before
connection and consult the manual for that equipment (if
necessary) before proceeding. Connect the interface cable
before applying power to the Base Station.
Base Station Connection and Routing —
Fully insert the
Power Cable and Interface (I/F) Cable connectors into their
respective ports in the underside of the Base Station (see
Figure 1). Then connect to an AC Adapter, and plug the AC
power cord into the (wall) outlet.
Figure 1. Connecting the Base Station
The Gryphon GM410X can also be Powered by the
Terminal. When powered by the Terminal, the
battery charger is automatically set as Slow
charge.
For some specific interfaces or hosts or lengths
of cable, the use of an external power supply may
be recommended for full recharging capability
(see
Technical Specifications on page 32
for more
details).
Base
Station
I/F Cable
AC/DC
Adapter
DC Power
Cord
Wall plug
Connector
