LED and Beeper Indications
Quick Reference Guide
35
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional “Green Spot” also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader’s func-
tions are programmable, and may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming barcode labels.
INDICATIO
N
DESCRIPTI
ON
LED
BEEPER
Power-up
Beep
The reader is
in the process
of powering-
up.
Reader beeps
four times at
highest fre-
quency and
volume upon
power-up.
Good Read
Beep
A label has
been suc-
cessfully
scanned by
the reader.
LED behav-
ior for this
indication is
configu-
rable via the
feature
“Good Read:
When to
Indicate”
(see the
PRG for
informa-
tion.)
The reader
will beep
once at cur-
rent fre-
quency,
volume,
mono/bi-
tonal setting
and duration
upon a suc-
cessful label
scan.
ROM Failure
There is an
error in the
reader's soft-
ware/pro-
gramming
Flashes
Reader
sounds one
error beep at
highest vol-
ume.
