Scanning Modes
Quick Reference Guide
9
Flashing —
The reader flashes
1
on and off regardless of the trigger
status.
Always On —
No trigger pull is required to read a barcode. Scan-
ning is continually on
2
.
Stand Mode —
No trigger pull is required to read a barcode. Scan-
ning is alternatively turned on and off.
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
Scan Mode = Flashing
1.
Controlled by Flash On Time and Flash Off Time. Use the PRG to program
these options.
2.
For energy saving purposes, the Always On feature has a user program-
mable timeout (default 5 hours of inactivity). A single manual trigger
pull is required to reactivate the scanner after the timeout.
