Indicators
6
Gryphon™ D432/412Plus
Indicators
LED Indicators
The Gryphon™ D432/D412Plus has one green LED indicator signaling
the following reader functions:
Beeper
The Gryphon™ D432/D412Plus basic software provides beeper signals
for good/wrong reading and for indicating errors. Its tone, volume and
duration can be directly configured by using the codes given in the
Gryphon™ D432/D412Plus Product Reference Guide available on the
website.
The application program can also manage the beeper (User Defined
Beeper) when the reader is controlled by a Host PC. It is possible to acti-
vate the beeper by sending a command from the Host to the reader via the
current communication interface.
Good Read Spot
It is possible to enable a green good-read spot, which will be projected in
the field of view when the reading is successful.
Setup
Make connections between Gryphon™ D432/D412Plus and the Host
PC using the correct interface cable.
Read the correct Interface Selection code.
Your reader is now ready to read codes using the default settings.
STATUS
BEHAVIOR
Power ON
The LED lights up for 2 seconds to signal the power supply is
present.
Power ON with USB (without
external power supply)
The LED blinks until the Host accepts the device.
Normal Function
The LED lights up after a good decoding and will switch off
only at the next trigger press.
