Datalogic Heron D110, Quick Reference Manual

DEFAULT VALUES 

RS232 DEFAULT SETTINGS 

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, 
delay disabled, rx timeout 5 sec., ack/nack disabled, FIFO 
enabled, serial trigger lock disabled; 

DATA FORMAT

: code identifier disabled, no field adjustment, 

code length not transmitted, 

no header

, 

terminator = CR-LF

, 

character replacement disabled 

IBM DEFAULT SETTINGS 

DATA FORMAT

: IBM Standard, code identifier disabled, 

no 

header

, 

no terminator

POWER SAVE 

scan rate max, standby disabled, sleep disabled 

READING PARAMETERS 

hardware trigger, trigger active level, no trigger timeout, 
Flash On = 1 sec, Flash Off = .6 sec, one read per cycle, 
safety time .5 sec, beeper intensity high, tone 2, beeper type 
monotone, beeper length short, good read spot duration 
medium, stand recognition beep enabled; automatic 
operation aiming light enabled 

DECODING PARAMETERS 

ink spread enabled, overflow control enabled, interdigit 
control enabled, Puzzle Solver™ disabled, decoding safety = 
one read 

CODE SELECTION 
Enabled codes

•

EAN 8/EAN 13 / UPC A/UPC E without ADD ON 
check digit transmitted, no conversions 

•

Interleaved 2/5 
check digit control and transmission, variable length 
code; 4-99 characters 

•

Standard Code 39 
no check digit control, variable length code; 1-99 
characters 

•

Code 128 
variable length code; 1-99 characters 

Disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical 
codes, MSI, Plessey, Telepen, Delta IBM, Code 

11, 

Code 16K, Code 49, RSS Codes

ADVANCED FORMATTING PARAMETERS* 

concatenation disabled, no advanced formats defined 

*  The advanced formatting parameters may not be compatible 

with the IBM 46xx cash register parameters.