TECHNICAL FEATURES
Heron
D110
Electrical Features
Power Supply
RS232
interface
IBM
46xx
5 Vdc
±
5%
12 Vdc directly taken from cash
register
RS232 IBM
46xx
Consumption:
Maximum
Operating
Sleep
mode
180 mA @ 5 Vdc
150 mA @ 5 Vdc
500 µA @ 5 Vdc
90 mA @ 12 Vdc
90 mA @ 12 Vdc
20 mA @ 12 Vdc
Max. Scan Rate
256 scans/sec
Reading Indicators
LED, Good Read Spot, Beeper
Optical Features
Sensor
CCD solid state (2048 pixels)
Illuminator LED
array
Wavelength
630 ~ 670 nm
Max. LED Output Power
0.31 mW
LED Safety Class
Class 1 EN 60825-1
Reading Field
see reading diagrams
Max. Resolution
0.10 mm (4 mils)
PCS
min. 15% (Datalogic Test Chart)
Environmental Features
Working Temperature
0
°
C to + 55
°
C
Storage Temperature
-20
°
C to + 70
°
C
Humidity
90% non condensing
Drop Resistance
(on concrete)
IEC 68-2-32 Test ED
1.8 m
ESD Protection
16 KV
Protection Class
IP30
Mechanical Features
Weight (without cable)
about 165 g. (5.8 oz.)
Cable Length
2 m (6 ft. 6 in.)
1 DEFAULT
UK
Read the RESTORE DEFAULT code.
I
Leggere il codice che ripristina i default.
F
Lire le code de configuration par défaut.
D
Lesen Sie den Restore Default Code, um die
Werkseinstellung wieder herzustellen.
E
Leer el código de restaurar los parámetros de
fábrica.
RESTORE DEFAULT
iPk
iPk
iPk
RS232 DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,
delay disabled, rx timeout 5 sec., ack/nack disabled, fifo
enabled, serial trigger lock disabled;
DATA FORMAT
: code identifier disabled, no field adjustment,
code length not transmitted,
no header
,
terminator = CR-LF
,
character replacement disabled
IBM DEFAULT SETTINGS
DATA FORMAT
: IBM Standard, code identifier disabled,
no
header
,
no terminator
POWER SAVE
scan rate max, standby disabled, sleep disabled
READING PARAMETERS
hardware trigger, trigger active level, no trigger timeout,
Flash On = 1 sec, Flash Off = .6 sec, one read per cycle,
safety time .5 sec, beeper intensity high, tone 2, beeper type
monotone, beeper length short, good read spot duration
medium, stand recognition beep enabled; automatic
operation aiming light enabled
