S100
parameters
PHYSICAL LAYER
Description
IO-Link Revision
1.1
SIO Modus
YES
Min Cycle Time
2.3 ms
Transmission Rate
38.4 kbit/s (COM2)
Process Data Length
PDInput: 3 Bit (M10, T10), 4 Bit (B10)
PDOutput: Not used
M-Sequence Capability
PREOPERATE: TYPE_0
OPERATE: TYPE_2_1
ISDU: supported
FEATURES
Description
Block Parameter
YES
Data Storage
YES
Supported Access Locks
Parameter (write) access
Data Storage
Profile Characteristic
Device Profile: Smart Sensor
Function Class: Device Identification
Function Class: Switching Signal Channel
Function Class: Device Diagnosis
Function Class: Teach Channel
Function Class: Teach-in Single Value
SERVICE DATA
The following ISDUs will not be saved via Data Storage: Device Access Locks (index 0xC), Teach-in Channel (index 0x3A)
System Parameters
Index (dec) Parameter
Object Name
Lenght Subindex
(offset)
Value/Range
Description
Data Type
Access*
0x000C (12)
Device Access
Locks
2 octets
Bit 1: Data Storage (0 = unlocked, 1 = locked)
Standardized Device locking functions:
Bit 0: Parameter (write) access (Not used)
Bit 1: Data Storage
Bit 2: Local parameterization (Not used)
Bit 3: Local user interface (Not used)
Bit 4-15: Reserved
RecordT
R/W
0x000D (13)
Profile
Characteristics
2 octets
2 octets
2 octets
2 octets
2 octets
2 octets
0x0001
0x8000
0x8001
0x8003
0x8004
0x8007
Smart Sensor Profile
Device Identification
Switching Signal Channel (SSC)
Device Diagnosis
Teach Channel
Teach-in single value
ArrayT of
UIntegerT16
RO
0x000E (14)
PDInput
Descriptor
3 octets
3 octets
3 octets
3 octets
0x01.0x01.0x00
0x01.0x01.0x01
0x01.0x01.0x02
0x01.0x01.0x03
SSC1 (OUT0)
SSC2 (OUT1)
TEACH STATUS FLAG
ALARM (
B10 only
)
ArrayT of
OctetStringT3
RO
*RO = read only, WO = write only, R/W = read/write
