Datalogic Jade X7, Quick Reference Manual

LED and Audio Indicators

Quick Reference Guide

                           7

LED and Audio Indicators

The scanning system provides onboard LED indicators (one multi-color “illuminating logo” per arch). 
The system may offer additional custom LEDs, audio sounds and other indicators which are unique to 
your installation. Be sure to check the documentation for the checkstand and other equipment for fur-
ther information.

Arch Indicators

LED Indicator 

(same on both arches)

One LED indicator is located on each arch (Entry and Exit) in the same position on each arch as shown. 
See the Table below for a listing of standard factory arch LED indications. The indications are not con-
figurable.

Table 1. Arch LED Status Indicators

DESCRIPTION

COLOR PATTERN

Arch Initial Program 
Load Event

Momentary

 Green (5s) – Off (30s)

Startup

Cycle

 Red (.5s) – Green (.5s) –

Blue (.5s)

Arch Completed 
Selftest Event

Momentary

 Green (1s) – Off (.5s)

Ready – POS not 
Connected

Cycle

 Black (.25s) – Blue (.25s) –

Black (.25s) – Blue (2.25s)

Ready – Reading 
not Enabled

Steady

 Blue

Ready – Reading 
Enabled

Steady

 Green

Sleep

Cycle

 Blue (1s) – Off (1s)

Fault

Cycle

 Red (2s) – Off (2s)

Calibration

Cycle

 Green (2s) – Off (2s)

Service

Cycle

 Blue (2s) – Green (2s)