Page 1
Datalogic Automation, Inc..
M-Series QuickStart Guide
Getting Started
Getting Started
Thank you for using Datalogic M-Series. This guide provides a brief overview to help you get started with your new sys-
tem. For more detailed instructions, please refer to the Reference Guide (843-0093) and the M-Series Processor and Cam-
era Guide (843-0148). It is important that you note the cautions and warnings in these manuals.
Safety Precautions
Warning:
There are no user-serviceable parts inside the Datalogic hardware. To avoid electrical shock, never open
the case. Opening the case or removing the tamper-proof sticker will void the product warranty.
Avertissement
: Il n'y a aucune partie utilisateur-utile à l'intérieur du matériel d'Datalogic. Pour éviter le choc élec-
trique, n'ouvrez jamais la valise. L'ouverture de la valise ou l'élimination de l'autocollant inaltérable videra la garan-
tie de produit.
Mounting Warning:
Mount the processor with the front or back of the unit facing down. For safety, do NOT
mount the processor with the filter side down. Mounting with the fan side down is acceptable only if approved
metal screen filters have been installed in all fan exhausts.
•
Read all of the following instructions before setting up your system.
Save this document for later use.
•
Follow all warnings and instructions in this manual and in other user guides shipped with your hardware compo-
nents.
•
To avoid damage to the vision system and its components,
never
plug in or unplug a cable when the power is on.
Always turn off the power supply before you make cable changes.
•
Never use the system if a power cable has been damaged. Do not allow anything to rest on a power cable and keep
them away from traffic.
•
The air inlets and exhausts on the top and sides of the unit are for ventilation. Do not block or cover these openings
or insert anything into these openings. Metal screen filters may be installed in the fan exhausts.
•
Do not expose the vision system to moisture, rain, or snow, and do not use it near water. If a component gets wet
unplug it.
•
To avoid injury, never open the case. Opening the case or removing the tamper-proof sticker will void the product
warranty.
Service Personnel Only - Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to battery maker’s instructions.
Unpack the M-Series Hardware
When your system arrives, check the shipping cartons for wrinkled or damaged corners, holes through the cardboard, or
other signs of rough handling or abuse. If you find any signs of damage, ask the delivery service to make a note on the
delivery receipt describing the damage.
Metal Screen Filter Installed
Metal Screen Filter NOT Installed.
Do NOT mount fan side down