![background image](http://html1.mh-extra.com/html/datalogic/magellan-1500i/magellan-1500i_product-reference-manual_3828493187.webp)
OTHER UPC/EAN OPTIONS
ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
177
UPC/EAN Composites
Enables/Disables Composites for the UPC/EAN families of labels.
The value is a bit field where the bits mean the following:
•
A setting of 0 (zero) disables this feature.
•
Bit0
‐
if set enabled Composites for UPCE, If clear disables Composites for UPCE
•
Bit1
‐
if set enabled Composites for UPCA, If clear disables Composites for UPCA
•
Bit2
‐
if set enabled Composites for EAN8, If clear disables Composites for EAN8
•
Bit3
‐
if set enabled Composites for EAN13, If clear disables Composites for EAN13:
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode below. You’ll need to cover any unused barcodes on this and the fac
‐
ing page to ensure that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the
Alpha-Numeric Keypad on page 305
that repre
‐
sent the desired number. The selectable range is 0
‐
15 resets. Pad all single and double
digit numbers with leading zeroes to yield a two
‐
digit entry (00
‐
15).
4. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
02FE(CR)
SetUPC/EAN Composites
Default setting for this feature is:
00 - Disabled
DEFAULT
Summary of Contents for Magellan 1500i
