manualshive.com logo in svg

Datalogic Magellan 2200VS, Reference Manual

The Datalogic Magellan 2200VS is a high-performance barcode scanner designed for efficient retail operations. For quick and easy setup, make sure to download the free Quick Reference Manual from our website. This comprehensive manual provides step-by-step instructions and troubleshooting tips, ensuring optimal performance and productivity.

Share
Download
background image

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon  97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be repro-
duced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates 
("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and 
transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, 
including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic 
versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit 
our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Dat-
alogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the 
right to change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All other 
brand and product names may be trademarks of their respective owners.

Magellan is a registered trademark of Datalogic Scanning, Inc. in many countries, including the U.S.A. and All-Weighs, FirstStrike and Surround-
Scan are registered trademarks of Datalogic Scanning, Inc. in the U.S.A. OmegaTek, Produce Rail, Productivity Index Reporting and SmartSen-
try are all trademarks of Datalogic Scanning, Inc.

This product may be covered by one or more of the following patents: 4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879 
• 4786798 • 4792666 • 4794240 • 4798943 • 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 • 
4939356 • 4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118 • 
5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185 • 
5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 • 
5311000 • 5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 • 
5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 • 5491328 • 
5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 • 5594231 • 5594441 • 
5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374 • 
5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581 • 
5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983 • 
5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284 • 
5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198 • 
6065676 • 6069696 • 6073849 • 6073851 • 6094288 • 6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 • 
6166375 • 6169614 • 6173894 • 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6244510 • 6259545 • 6260763 • 
6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576 • 6332577 • 
6343741 • 6454168 • 6478224 • 6568598 • 6578765 • 6705527 • 6857567 • 6974084 • 6991169 • 7051940 • 7170414 • 7172123 • 7201322 • 
7204422 • 7215493 • 7224540 • 7234641 • 7243850 • 7374092 • 7407096 • 7490770 • 7495564 • 7506816 • 7527198 • 7527207 • 7537166 • 
7562817 • 601 26 118.6 • AU703547 • D312631 • D313590 • D320011 • D320012 • D323492 • D330707 • D330708 • D349109 • D350127 • 
D350735 • D351149 • D351150 • D352936 • D352937 • D352938 • D352939 • D358588 • D361565 • D372234 • D374630 • D374869 • D375493 
• D376357 • D377345 • D377346 • D377347 • D377348 • D388075 • D446524 • EP0256296 • EP0260155 • EP0260156 • EP0295936 • 
EP0325469 • EP0349770 • EP0368254 • EP0442215 • EP0498366 • EP0531645 • EP0663643 • EP0698251 • EP01330772 • GB2252333 • 
GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 • GB2308678 • GB2319103 • GB2333163 • GB2343079 • GB2344486 • 
GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 • JP1962823 • JP1971216 • JP2513442 • JP2732459 • JP2829331 • 
JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • RE40071 • Other Patents Pending

Summary of Contents for Magellan 2200VS

















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Magellan 2200VS

Datalogic Matrix 300N Product Manual preview
Matrix 300N
Brand: Datalogic Pages: 2
Franklin WP5600 User Manual preview
WP5600
Brand: Franklin Pages: 51
Postech MS3391-L User Manual preview
MS3391-L
Brand: Postech Pages: 41
Comm-co iSCAN100 Operating Manual preview
iSCAN100
Brand: Comm-co Pages: 32
AWID Sentinel-Prox DC-1023 User Manual preview
Sentinel-Prox DC-1023
Brand: AWID Pages: 12
ArgoxScan AS-8150 User Manual preview
AS-8150
Brand: ArgoxScan Pages: 110
CDVI SOLARPB Installation Manual preview
SOLARPB
Brand: CDVI Pages: 16
CDVI SOLARKPB Installation Manual preview
SOLARKPB
Brand: CDVI Pages: 20
NESS ID TECK IPK101 User Manual preview
IPK101
Brand: NESS ID TECK Pages: 15
Banner TCNM-AD Quick Start Manual preview
TCNM-AD
Brand: Banner Pages: 17
Elkron DK700M-P Complete Manual preview
DK700M-P
Brand: Elkron Pages: 2
Datalogic DS2x00N-DS4800 Series Setup Procedure Using Programming Barcodes preview
DS2x00N-DS4800 Series
Brand: Datalogic Pages: 20
Opticon OPN-2006 BLUETOOTH Demo Application Manual preview
OPN-2006 BLUETOOTH
Brand: Opticon Pages: 24
IntelliScanner IS90 User Manual preview
IS90
Brand: IntelliScanner Pages: 28
SmarTerminal Smart-R400 User Manual preview
Smart-R400
Brand: SmarTerminal Pages: 33
Leuze electronic BCL 300 Series Technical Description preview
BCL 300 Series
Brand: Leuze electronic Pages: 179
CAS BP-DT-4 Manual preview
BP-DT-4
Brand: CAS Pages: 30
Xcellon CR-D6A User Manual preview
CR-D6A
Brand: Xcellon Pages: 8

Brands by name

Popular brands

Load more brands