Datalogic Magellan 3450VSi Product Reference Manual Download

Page: 338 / 352

microSD Function Details

328

Magellan™ 3450VSi

Export a Configuration file from the Scanner to the microSD card

By AUTORUN.DLS file

1. Generate a text file by any text editor as follows and save it as

AUTORUN.DLS.
$START$
DUMPCFG,SDCONFIG.TEX

(Filename can be anything, for example

“SOMETHING.TEX”

)

$END$

2. Save or copy file AUTORUN.DLS to microSD card
3. Insert the microSD card to scanner.
4. Wait for 3 seconds,

A scanner configuration file named

SDCONFIG.TXT

is saved to the

microSD card.

Export Scanner Status to microSD card

The data includes scanner ID, statistics and scanner health.

By scanning a label

1. Insert the microSD card into the scanner.
2. Scan the status export label:

<FNC3>STATUS<CR>

3. Upon scanner audio indication of completion, the scanner status text file

named

STATUS.TXT

is saved to the microSD card.

By AUTORUN.DLS file

1. Generate a text file by any text editor as follows and save it as

AUTO-

RUN.DLS

$START$
DUMPSTATS,DMPSTATS.TXT
$END$

2. Save or copy the

AUTORUN.DLS

file to the microSD card.

3. Insert the microSD card into the scanner.
4. Wait for about 3 seconds. A scanner statistics file named

DMPSTATS.TXT

saved to the microSD card.

Summary of Contents for Magellan 3450VSi

































































































































































































































































































































































Search results

Summary of Contents for Magellan 3450VSi

Reviews:

Related manuals for Magellan 3450VSi

Brands by name

Popular brands

Datalogic Magellan 3450VSi, Product Reference Manual

Search results

Summary of Contents for Magellan 3450VSi

Reviews:

Related manuals for Magellan 3450VSi

Brands by name

Popular brands