Datalogic Magellan 3450VSi Product Reference Manual Download

Page: 346 / 352

Handheld Data Format Requirements General

336

Magellan™ 3450VSi

AIM Formats

AIM specifies a 3-character string that is attached as a prefix to the label data

for transmission. Because AIM specifies one identifier for UPC-A, UPC-E and

EAN-13 labels, UPC-A, UPC-E and EAN-13 will be received from the handheld

and transmitted by the scanner as EAN-13. The ']' character must be the first

character received in the label transmission from the handheld.
The following sections describe the prefix strings and identify what specific

label characteristics can be supported.

UPC-A

• AIM does not specify UPC-A as a separate symbology using this transmis-

sion format - labels will be transmitted as EAN-13.

• Example: ']E00060992011187'.

UPC-E

• AIM does not specify UPC-E as a separate symbology using this transmis-

sion format - labels will be transmitted as EAN-13.

• Example: ']E00000000998875'.

EAN-13

• Check digit must be included in label data and is assumed to be correct.

• Prefix must be ASCII characters ']E0'- total length including prefix must be

16.

• Example: ']E01101234567891'.

EAN-8

• Check digit must be included in label data and is assumed to be correct.

• Prefix must be ASCII characters ']E4' - total length including prefix must be

11.

• Example: ']E400210126'.

2-Digit Supplemental

• Supplemental data is appended to any EAN base label.

• Prefix must be ASCII characters ']E1'.

• length of Supplemental data including prefix must be 5. Total required

length is 21 for EAN-13 and 16 for EAN-8.

• Examples: add-on portion is highlighted data is underlined.

UPC-A 2-Digit add-on

']E00060992011187

]E1

UPC-E 2-Digit add-on

']E00000000998875

]E1

EAN-8 2-Digit add-on

']E400210126

]E1

EAN-13 2-Digit add-on

']E01101234567891

]E1

5-Digit Supplemental

• Supplemental data is appended to any EAN base label.

Summary of Contents for Magellan 3450VSi

































































































































































































































































































































































Search results

Summary of Contents for Magellan 3450VSi

Reviews:

Related manuals for Magellan 3450VSi

Brands by name

Popular brands

Datalogic Magellan 3450VSi, Product Reference Manual

Search results

Summary of Contents for Magellan 3450VSi

Reviews:

Related manuals for Magellan 3450VSi

Brands by name

Popular brands