background image

16

Magellan™ 3500HSi

Warranty

Datalogic warrants to Customer that this product will be free from defects in materials and 
workmanship for a period of 3 years from product shipment.
Datalogic warrants that the goods delivered under these General Terms for the Sale of 
Goods shall be free from defects in materials and workmanship under normal and proper 
use during the Warranty Period (as defined below). Datalogic’s liability under this warranty 
is limited to furnishing the labor and parts necessary to remedy any defect covered by this 
warranty and restore the product to its normal operating condition. Repair or replacement 
of product during the warranty does not extend the original warranty term. Products are 
sold on the basis of specifications applicable at the time of manufacture and Datalogic has 
no obligation to modify or update products once sold. The warranty period shall extend 
from the date of shipment from Datalogic for the duration published by Datalogic for the 
product at the time of purchase (“Warranty Period”).
If, during the Warranty Period, Datalogic determines that a product has defects in material 
or workmanship, Datalogic shall, at its sole option repair or replace the product without 
additional charge for parts and labor, or give a credit for the defective products duly 
returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, 
components, subassemblies or products that have been tested as meeting applicable 
specifications for equivalent new material and products. Buyer will allow Datalogic to 
scrap all parts removed from the repaired product. Datalogic warrants repaired hardware 
devices only, against defects in workmanship and materials on the repaired assembly for a 
90 day period starting from the date of shipment of the repaired product from Datalogic or 
until the expiration of the original Warranty Period, whichever is longer. Datalogic does not 
guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configu-
rations, data, and applications on the repaired units and at its sole discretion can return 
the units in the “factory default” configuration or with any software or firmware update 
available at the time of the repair (may be newer than the firmware or software installed 
during the manufacture of the product). Buyer accepts responsibility to maintain a backup 
copy of its software and data. 

Warranty Exclusions

The Datalogic Warranty shall not apply to:

(i) 

any product which has been damaged, modified, altered, repaired or upgraded by 
other than Datalogic service personnel or its authorized representatives;

(ii) 

defects or damages caused by any third parties’ tort committed against the 
Buyer.

(iii) 

any claimed defect, failure or damage which Datalogic determines was caused by 
faulty operations, improper use, abuse, misuse, wear and tear, negligence, 
improper storage or use of parts or accessories not approved or supplied by Dat-
alogic;

(iv) 

any claimed defect or damage caused by the use of product with any other 
instrument, equipment or apparatus;

(v) 

any claimed defect or damage caused by the failure to provide proper mainte-
nance, including but not limited to cleaning the upper window in accordance with 
product manual or the replacement of upper window/cartridge due to scratching, 
stain or other degradation;

Summary of Contents for Magellan 3500HSi





























Reviews: