2
Magellan
TM
800i
The Magellan 800i utilizes illumix™ intelligent illumination technology
to optimize light levels for a variety of bar code scanner functions includ-
ing automatic reading of bar codes from printed surfaces, mobile devices
and image capture in variable contrast environments.
Mounting the Scanner (Optional)
The scanner can be permanently attached to a wall or countertop as fol-
lows:
1.
After identifying an optimal position for the scanner, cut out
and securely hold the screw hole template (located on the
inside back cover) in the desired position matching the scan-
ner’s footprint.
2.
Mark the center of both screw locations using a pencil or
marker and remove the template.
3.
If necessary, drill pilot holes in the marked positions, then
thread two pan head
1
, self-tapping screws in place, leaving their
heads protruding approximately 1/8” (3mm) above the coun-
ter or wall surface.
4.
Align the larger ends of the keyholes located on the scanner’s
bottom with the protruding screw heads, then push down and
rotate clockwise to lock the scanner in position.
1.
The screw heads must fit inside the larger end of the keyholes on the
bottom of the scanner.
