LED and Beeper Indications
Quick Reference Guide
7
LED and Beeper Indications
The scanner’s beeper sounds and its lamps and indicator LEDs illuminate to indicate
various functions or errors. The tables in this section list some of these indications. Ref-
erence the PRG for a more complete listing.
NOTE
INDICATION
Scanner
LED
BEEPER
COMMENT
Count
Frequency
Volume
Duration
Pre-operating
Mode
OFF
OFF
Power-up Beep
N/A
Unique WAV file sound.
Default sound is a synthesized chord end-
ing with two light bells.
Good Read Beep Bright flash
1
Current
Current
Current
Frequency, volume and duration are con-
figurable.
ROM Failure
200ms ON
200 ms OFF
1
Error
Highest
200ms ON
200ms
OFF
Indicates either Boot or Program ROM fail-
ure.
Scanner Active
Mode
On steady
and dim
N/A
The scanner is ready for operation. Scan-
ning is immediately available.
Scanner Disabled
Continuous
blink 100ms
ON / 900ms
OFF
N/A
The Host has disabled scanning.
Sleep Mode
10ms ON
1990ms OFF
N/A
The scanner has been inactive for a period
and is in a power-saving mode.
Chirp Indications
(see comment)
N/A
6
Highest
Current
20ms ON
20ms OFF
A “Chirp” is used to indicate the following:
-Reading labels while in limited scanning
mode.
-Label rejection during label programming.
-A label with no data.
-Labels rejected through the auxiliary port
when in Scanner
Diagnostics Mode.
INDICATION
Scale LED
BEEPER
COMMENT
Scale at Zero
On steady
N/A
The scale is at rest and reads zero weight.
The scale is ready to weigh.
Scale Error
Reporting
Coded
sequence
N/A
When the scanner is in Scale Diagnostics
Mode, the Remote Scale Display and the
Scale LED indicator can communicate spe-
cific scale failures. See the PRG for more
details.
Behaviors listed in the tables are programmable, and may or may
not be turned on. For example, certain indications such as the
power-up beep can be disabled using programming bar code
labels.
Summary of Contents for Magellan 9400i
Page 4: ...ii MagellanTM 9300i and 9400i NOTES...
Page 15: ......
