MATRIX-1000™ QUICK GUIDE
2
Figure A
Reading Window
Auxiliary Interface
Main Tx LED
Good Read LED
Main/Auxiliary Interface
1
2
4
5
3
6
7
External Trigger LED
Power On LED
NOTE
For further details on product installation, see the complete Installation Manual available on the
CD included with this product.
Compliance:
-
This product is intended to be installed by Qualified Personnel only.
- This product is intended to be connected to a UL Listed
Computer which supplies power directly to the reader or a
UL Listed Direct Plug-in Power Unit marked LPS or
“Class 2”, rated 10 to 30 V, minimum 1 A.
- In order to meet the EMC requirements:
•
connect reader chassis to the plant earth ground by
means of a flat copper braid shorter than 100 mm;
•
connect the main interface cable shield to pin 1 of the
reader 25-pin connector;
•
use two clip-on ferrite sleeves (type Stewart 28A2029-
0A0) on the main interface cable near the reader 25-
pin connector;
TO EN 60825-1:2001
Model Description:
MATRIX - 10X1
Optics
2 = High Density (HD)
3 = Standard Density (STD)
4 = Low Density (LD)
5 = Medium Range (MR)
1
4
5
3
6
7
2
