MATRIX 300™ REFERENCE MANUAL
24
2
In normal operating mode the colors and meaning of the five LEDs are illustrated in the
following table:
READY
green LED indicates that the reader is ready to operate (Figure 13, 7)
GOOD
green LED confirms successful reading (Figure 13, 6)
TRIGGER
yellow LED indicates the status of the reading phase (Figure 13, 5)
COM
yellow LED indicates active communication on the main serial port * (Figure 13, 4)
STATUS
red LED indicates a NO READ result (Figure 13, 3)
* When connected to a Fieldbus network through the CBX500, the COM LED is always active, even in the
absence of data transmission, because of polling activity on the Fieldbus network.
During the reader startup (reset or restart phase), these five LEDs blink for one second.
In X-
PRESS™ Configuration mode the colors and meaning of these five LEDs are described
in par. 2.4.
The keypad
button (Figure 13, 8), is software programmable. By default it starts the X-
PRESS™ interface for quick installation without using a PC (see chp. 1).
2.3 ID-
NET™
The ID-
NET™ network is a built-in high-speed interface dedicated
for high-speed reader interconnection. ID-
NET™ is in addition to
the Main and Auxiliary serial interfaces.
The following network configurations are available:
ID-
NET™ M/S Synchronized:
Single station
– multiple readers
ID-
NET™ interface allows local connection of multiple readers reading different sides of the
same target. All readers share a single presence sensor and activate/deactivate
simultaneously.
At the end of each reading phase a single data message is transmitted to the host.
Thanks to ID-
NET™, data communication among readers is highly efficient so that an
immediate result will be available.
Summary of Contents for Matrix 300
Page 1: ...REFERENCE MANUAL Matrix 300...
Page 160: ......
