MOUNTING AND POSITIONING MATRIX 320
PRODUCT REFERENCE GUIDE
59
Matrix 320 is able to decode code labels at a variety of angles; however significant
angular distortion may degrade reading performance.
When mounting Matrix 320, take into consideration these
ideal
label position angles:
Pitch or Skew 10° to 20° and Tilt 0°
.
NOTE
The
Pitch, Skew and Tilt
angles are represented in Figure 42. Follow the suggestions
below for the best orientation:
Position the reader in order to avoid the direct reflection of the light emitted by the
Matrix 320 reader; it is advised to
assure at least 10°
for the Skew angle.
No Pitch,
Tilt or Skew
Pitch
Minimize
Tilt
any angle
inside FOV
Skew
assure at least 10°
Figure 42 - Pitch, Tilt, and Skew Angles
In some cases, such as low contrast or low illumination, it can be useful to use a
Pitch or
Skew
angle = 0°.
The
Tilt
angle is also represented in Figure 42. Matrix 320 can read labels with any tilt
angle. Keep in mind however, that since linear barcodes are rectangular, the reader
should be aligned to fit them into the horizontal FOV.
for FOV vs. Reading Distance considerations.
Since Matrix 320 is omni-directional on the code plane, the Pitch and
Skew angles have the same significance with respect to the code plane.
However in some advanced code reading applications performance can
be improved by modifying the Skew angle.
Summary of Contents for Matrix 320
