STEP 2 - MOUNT AND POSITION THE READER
PRODUCT REFERENCE GUIDE
3
STEP 2 - MOUNT AND POSITION THE READER
1. To mount the Matrix 320, use the mounting brackets to obtain the most suitable
position for the reader. The mounting solutions are provided in "
Positioning Matrix 320" on page 54
.
2. When mounting the Matrix 320 take into consideration these three ideal label
position angles:
Pitch or Skew 10° to 20° and Tilt 0°
, although the reader can read
a code at any tilt angle provided the code fits into the Field Of View (FOV).
No Pitch,
Tilt or Skew
Pitch
Minimize
Tilt
any angle
inside FOV
Skew
assure at least 10°
Figure 4 - Pitch, Skew and Tilt Angles
3. Refer to the reading diagrams in
and minimum distance requirements according to the base/lens combination
used for your application.
NOTE
Rapid Configuration of the Matrix 320 reader can be made either through
the X-PRESS interface (steps 4-6) which requires no PC connection, or
by using the DL.CODE Configuration Program (steps 7-8). Select the pro-
cedure according to your needs.
Summary of Contents for Matrix 320
