MATRIX 450™ QUICK REFERENCE GUIDE
20
STEP 9 – TEST MODE
Use a code suitable to your application to test the reading performance of the system.
1. Enter
the
Test
function by pressing and holding the X-PRESS™ push button until the
Test LED is on.
2. Release the button to enter the
Test
function.
Once entered, the Bar Graph on the five LEDs is activated and when codes are placed
in the reading area (FOV), the Bar-Graph shows the Good Read Rate. In case of no
read condition, only the STATUS LED is on and blinks.
Figure 15 – X-PRESS™ Interface: Test Function
3. To exit the Test, press the X-PRESS™ push button once.
NOTE
By default, the Test exits automatically after three minutes.
The Bar Graph has the following meaning:
READY
SETUP
FOCUS
TEST
LEARN
GOOD
TRIGGER
COM
STATUS
red yellow yellow green green
READY
SETUP
FOCUS
TEST
LEARN
GOOD
TRIGGER
COM
STATUS
20%
40%
60%
75%
95%
