4-1
Datalogic S.r.l.
C H A P T E R 4
Processor I/O
There are two versions of the MX-U processor, one with sourcing outputs - MX-U81-4-P-1, and one with sinking outputs
- MX-U81-4-N-1.
This section discusses the MX-U81 Processor I/O scheme. Refer to this sec-
tion for all specifications when wiring your inputs and outputs into the Pro-
cessor.
Note
: Your MX-U81 Processor does not provide a voltage source for inputs
and outputs – it must be provided by an external source. Refer to the module
tables below for more voltage requirement information.
Note
: The Trigger Signal and Strobe Output for MX-U81 cameras are sepa-
Processor I/O Connection
To connect MX-U81 processor input and output signals use either cable 606-0675-xx (37 pin D-sub Male to Male Cable)
with terminal block 248-0110, or use cable 606-0675-xx and remove one end (to create a pigtail) with no terminal block.
IMPORTANT: Do not connect or disconnect the cable while power is on
Current Sinking (NPN) I/O
Connector and terminal numbers for model numbers containing the letter “N” are listed in the following table.
Connector or terminal
number
Color Code
Signal Name
1
2
Black
Brown
Output Minus (Note 1)
Input 1- and Event 1-
3
4
Red
Orange
Input 2- and Event 2-
Input 3-
5
6
Yellow
Green
Input 4-
Input 5-
7
8
Blue
Purple
Input 6-
Input 7-
9
10
Gray
White
Input 8-
Input 9-
11
12
Pink
Light Green
Input 10-
Input 11-
13
14
Black/White
Brown/White
Input 12-
Input 13-
Summary of Contents for MX-U81
