STEP 3 – MOUNT AND POSITION THE CAMERA
PRODUCT REFERENCE GUIDE
9
2. Gently squeeze the clips on each side of the filter while you gently pull straight up
from the illuminator.
To Replace the Optional Lens Filter
1. Line up the clips on the filter with the notches in the illuminator.
2. Gently squeeze the clips on each side of the filter while you gently press straight
down on the filter.
STEP 3 – MOUNT AND POSITION THE CAMERA
Use the P-Series™ mounting brackets to obtain the most suitable position for the cam
-
era. The most common mounting configuration is shown in the figure below.
Figure 2- Positioning with Mounting Bracket
When mounting the camera, take into consideration that significant pitch, skew, or tilt
may degrade accuracy
.
Figure 3- Pitch, Tilt and Skew Angles
STEP 4 – FOCUS THE CAMERA
To adjust the P-Series™ lens, use VPM to continuously snap and display an image. Use
the camera Focus adjustment on the side of the camera to adjust the focus.
1. Install or change the lens, if necessary. (See “STEP 2 – Install the lens and illumina
Pitch
Tilt
No Pitch, Tilt or Skew
Pitch
Minimize
Tilt
any angle
inside FOV
Skew
Assure at least 10°
