Indicators
Quick Reference Guide
3
Indicators
LED Indicators
The PowerScan™ PM8500 family uses green LED indicators to signal the follow-
ing reader functions:
Beeper
The PowerScan™ PM8500 basic software provides beeper signals for good/wrong
reading and for indicating errors. Its tone, volume and duration can be directly
configured by using the codes given in the PowerScan™ PM8500 Product Refer-
ence Guide (PRG) available on the website.
The application program can also manage the beeper (User Defined Beeper) when
the reader is controlled by a Host PC. It is possible to activate the beeper by send-
ing a command from the Host to the reader via the current communication inter-
face.
Good Read Spot
A green good read spot will be projected in the field of view when the reading is
successful.
STATUS
BEHAVIOR
Power ON
At power-on, the LEDs blink briefly, then light up for 2
seconds to signal the power supply is present.
Normal Function
The LED lights up after a good decoding and will
switch off only at the next trigger press.
Summary of Contents for PowerScan M8500
Page 4: ...NOTES...