Charging the Batteries
4
PowerScan™ M8500
Charging the Batteries
Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries.
Place the PowerScan™ M8500 into the BC-80X0 cradle or the C-8000 battery
charger. The "Reader" LED on the cradle/battery charger turns red.
The battery is completely charged when the "Reader" LED on the cradle/battery
charger turns green.
To change the battery, push the Release Button as indicated by Arrow 1 and
extract the battery pack from the reader handle. Then, insert the new battery pack
into the reader handle until a ‘click’ is heard and the Release Button moves back to
its neutral position.
1
2
Summary of Contents for PowerScan M8500
Page 4: ...NOTES...
