ENTER/EXIT PROGRAMMING MODE
DISPLAY AND KEYBOARD FEATURES
246
POWERSCAN™ PD/PM96XX
Set String Terminator
Sets the terminator of the predefined strings.
Set String Terminator
$CPWEF
To configure this feature, scan the ENTER/EXIT PRO
-
GRAMMING MODE bar code above, then the bar code
at left, and then read 32 digits representing 16 ASCII
characters in
.
The digits must be the hexadecimal ASCII represen
-
tation of the desired characters. If less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
0x00000000000000000000000000000000
