FEATURES FOR STAR MODELS ONLY
ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
267
FEATURES FOR STAR MODELS ONLY
The features in this section are valid only for the PowerScan PM96XX Star model:
• "
STAR Radio Protocol Timeout" on page 267
• "
STAR Radio Transmit Mode" on page 268
STAR Radio Protocol Timeout
This parameter sets the valid wait time before transmission between the handheld
reader and Base Station is considered failed.
When setting this parameter, take into consideration the radio traffic (number of read
-
ers in the same area). The selectable range for this feature is from 02 to 25 seconds. See
in “References” for detailed information and examples for setting this feature.
Set Radio Protocol Timeout
$CSTPT
To configure this feature, scan the ENTER/EXIT PRO
-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu
-
meric characters in
represent
-
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
Radio Protocol Timeout = 02 (2 seconds)
