LABEL ID
ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
85
LABEL ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex
0x01-0xFF), used to identify a bar code (symbology) type. It can be appended previous
to or following the transmitted bar code data depending upon how this option is
enabled. This feature provides options for configuring custom Label IDs as a pre-loaded
set (see
below) or individually per symbology (see "
Set Individually Per Symbology" on page 86
). If you wish to program the reader to always
include an industry standard label identifier for ALL symbology types, see the previous
feature "
.
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs, the USA set and the EU set. See
Label ID: Pre-loaded Sets" on page 287
for more information concerning the pre-loaded
sets that are provided.
CAUTION: When changing from one Label ID set to another, all other reader
configuration settings, including the host interface type, will be erased and
set to the factory defaults. Any custom configuration or custom defaults
will be lost.
$AE
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
$Ae