Using the PowerScan™ PM/PBT9600
4
POWERSCAN™ PM/PBT9600
USING THE POWERSCAN™ PM/PBT9600
The PowerScan™ PM/PBT9600 normally functions by cap
-
turing and decoding codes. Turn on the scanner by press
-
ing the trigger for 2 seconds. When the scanner starts up,
it vibrates. After the vibration, the trigger can be released
and the startup phase ends. The reader is equipped with
an internal Motionix™ motion-sensing function which acti
-
vates the aiming system on device motion. The intelligent
aiming system indicates the field of view which should be
positioned over the bar code:
Table 1 - Aiming System
The field of view indicated by the aiming system will be
smaller when the reader is closer to the bar code and
larger when it is farther from the code. Symbologies with
smaller elements (mil size) should be read closer to the
unit. Symbologies with larger elements (mil size) should
be read farther from the unit.
Successful reading is signaled by an audible tone plus a
good-read green spot LED indicator and vibration. Refer
-
ence the PowerScan™ 9600 Family Product Reference
Guide (PRG) for more information about this feature and
other programmable settings.
TYPE
AIMER PATTERN
-SRxxxRB
-HPxxxRB
-DHPxxxRB
-DKHPxxxRB
-DCRB
