Installing the Battery Pack
Quick Reference Guide
5
Charging the Batteries
Once the BC 90x0-BT is powered, you can charge the reader's
batteries. Place the PowerScan
™
PBT9501 into the BC 90x0-
BT cradle. The Reader LED on the cradle/battery charger
turns red. The battery is completely charged when the
Reader LED on the cradle/battery charger turns green.
Changing the Batteries
Fixed Pack Models
1. Unscrew the bottom of the handle as shown to release
the battery.
2. Pull down to remove the battery.
Removable Pack models
1. Push the button at the bottom of the handle as shown
to release the battery.
2. Pull down to remove the battery.
WARNING
Do not incinerate, disassemble, short terminals
or expose to high temperature. Risk of fire,
explosion. Use specified charger only. Risk of
explosion if the battery is replaced by an incor-
rect type. Dispose of the batteries as required by
the relevant laws in force.
1
2
1
2
Summary of Contents for PowerScan Retail PBT9501-RT
