Pick Mode
18
PowerScan™ Retail PBT9501-RT
Motion Aiming Control
This feature configures the ability of the scanner to
Enable/Disable the Aiming system when motion is
detected (Motionix™ motion-sensing technology). Scan
the Enter/Exit Programming bar code above, then either
of the bar codes below.
Pick Mode
Pick Mode is a Decoding and Transmission process where
bar codes that are not within the configurable distance
from the center of the aiming pattern are not acknowl-
edged or transmitted to the host. It is active only in Trigger
Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
Motion Aiming Control = Enable
Motion Aiming Control = Disable
NOTE
This feature is not compatible with Multiple Labels
Reading in a Volume. See the PRG for more informa-
tion.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
Pick Mode = Enable
Summary of Contents for PowerScan Retail PBT9501-RT
