background image

Base Station Indications

34

QuickScan™ QM21X1

Datalogic a return authorization number (RMA) for return of 
the product to a designated Datalogic service center. If Data-
logic determines Customer’s claim is valid, Datalogic will 
repair or replace product without additional charge for parts 
and labor. Customer shall be responsible for packaging and 
shipping the product to the designated Datalogic service cen-
ter, with shipping charges prepaid. Datalogic shall pay for the 
return of the product to Customer if the shipment is to a loca-
tion within the country in which the Datalogic service center is 
located. Customer shall be responsible for paying all shipping 
charges, duties, taxes, and any other charges for products 
returned to any other locations.   Failure to follow the applica-
ble RMA policy, may result in a processing fee.  Customer shall 
be responsible for return shipment expenses for products 
which Datalogic, at its sole discretion, determines are not 
defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i)

any product which has been damaged, modified, 
altered, repaired or upgraded by other than Datalogic 
service personnel or its authorized representatives;

(ii)

any claimed defect, failure  or damage which Datalogic 
determines was caused by faulty operations, improper 
use, abuse, misuse, wear and tear, negligence, 
improper storage or use of parts or accessories not 
approved or supplied by Datalogic;

(iii)

any claimed defect or damage caused by the use of 
product with any other instrument, equipment or 
apparatus;

(iv)

any claimed defect or damage caused by the failure to 
provide proper maintenance, including but not limited 
to cleaning the upper window in accordance with 
product manual;

(v)

any defect or damage caused by natural or man-made 
disaster such as but not limited to fire, water damage, 
floods, other natural disasters, vandalism or abusive 
events that would cause internal and external compo-
nent damage or destruction of the whole unit, con-
sumable items;

(vi)

any damage or malfunctioning caused by non-restor-
ing action as for example firmware or software 
upgrades, software or hardware reconfigurations etc.; 

(vii) the replacement of upper window/cartridge due to 

scratching, stains or other degradation and/or

(viii) any consumable or equivalent (e.g., cables, power sup-

ply, batteries, keypads, touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or 
obligations under this warranty except to a purchaser or 

Summary of Contents for QuickScan I QM21X1

















































Reviews: