QUICKSCAN
TM
MOBILE
1
USING QUICKSCAN
TM
MOBILE READER AND
CRADLE
The QuickScan
Mobile reader and cradle build a Cordless Reading System for
the collection, decoding and transmission of barcoded data.
Standard models can be connected to a Host PC through a USB, RS-232,
Wedge or Pen emulation cable. All models are suited for single-cradle layouts.
The LEDs signal the QuickScan Mobile cradle status, as described in the
following table:
LED
BEEPER
STATUS
Power on /
Data
-
Yellow On = QuickScan
®
Mobile cradle is
powered.
Yellow Blinking = the cradle receives data
and commands from the Host or the reader.
Charging
-
Red On = the battery charge is in progress.
Charge
completed
-
Green On = the battery is completely
charged.
Alternating
red/green
Repetitive
beep
Charging out of temperature range, over-
current or over-voltage conditions
Power on / Data
(yellow LED)
Charging
(red LED)
Charge completed
(green LED)
