background image

Warranty

32

   QUICKSCAN™ QD2590

WARRANTY

Datalogic warrants that the Products shall be free from defects in materials
and workmanship under normal and proper use during the Warranty
Period. Products are sold on the basis of specifications applicable at the
time of manufacture and Datalogic has no obligation to modify or update
Products once sold. The Warranty Period shall be 

five years

 from the date

of shipment by Datalogic, unless otherwise agreed in an applicable writing
by Datalogic.
Datalogic will not be liable under the warranty if the Product has been
exposed or subjected to any: (1) maintenance, repair, installation, han-
dling, packaging, transportation, storage, operation or use that is improper
or otherwise not in compliance with Datalogic’s instruction; (2) Product
alteration, modification or repair by anyone other than Datalogic or those
specifically authorized by Datalogic; (3) accident, contamination, foreign
object damage, abuse, neglect or negligence after shipment to Buyer; (4)
damage caused by failure of a Datalogic-supplied product not under war-
ranty or by any hardware or software not supplied by Datalogic; (5)any
device on which the warranty void seal has been altered, tampered with,
or  is  missing;  (6)  any  defect  or  damage caused by natural or man-made
disaster such as but not limited to fire, water damage, floods, other natural
disasters, vandalism or abusive events that would cause internal and exter-
nal component damage or destruction of the whole unit, consumable
items; (7) use of counterfeit or replacement parts that are neither manu-
factured nor approved by Datalogic for use in Datalogic-manufactured
Products; (8) any damage or malfunctioning caused by non-restoring action
as for example firmware or software upgrades, software or hardware
reconfigurations etc.; (9) loss of data; (10) any consumable or equivalent
(e.g. cables, power supply, batteries, etc.); or (11) any device on which the
serial number is missing or not recognizable.

THE DATALOGIC WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, WHETHER WRITTEN, EXPRESS, IMPLIED, STATUTORY OR
OTHERWISE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. DATA-
LOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY BUYER
ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS
UNDER THE ABOVE. THE REMEDY SET FORTH IN THE WARRANTY STATE-
MENT IS THE BUYER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY
CLAIMS. NO EXTENSION OF THIS WARRANTY WILL BE BINDING UPON DAT-
ALOGIC UNLESS SET FORTH IN WRITING AND SIGNED BY DATALOGIC'S
AUTHORIZED REPRESENTATIVE. DATALOGIC'S LIABILITY FOR DAMAGES ON
ACCOUNT OF A CLAIMED DEFECT IN ANY PRODUCT DELIVERED BY DATA-
LOGIC SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT
ON WHICH THE CLAIM IS BASED. DATALOGIC SHALL NOT BE LIABLE FOR
DAMAGES RELATING TO ANY INSTRUMENT, EQUIPMENT, OR APPARATUS
WITH WHICH THE PRODUCT SOLD UNDER THIS AGREEMENT IS USED. 

Fur-

ther details on warranty coverage, rights and conditions are addressed
under and regulated by the Terms and Conditions of Sales of Datalogic
available at https://www.datalogic.com/terms_conditions_sales.

Summary of Contents for QuickScan QD2590

















































Reviews: