Matrix-1000™
28
3
3.3 STARTUP
After completing the mechanical and electrical connections to Matrix-1000
, you can
begin software configuration as follows:
1. Power on the Matrix-1000
reader. Wait for the reader startup. The system
bootstrap requires a few seconds to be completed. The reader automatically
enters Run Mode.
2. Run the VisiSet™ program.
3. Press
Connect
on the VisiSet™ menu bar. The PC will automatically connect to
the Matrix-1000
reader.
Upon connection, Matrix-1000
exits Run Mode and displays the Main Menu on
VisiSet™ with all the commands necessary to monitor your reader's
performance. You can select these commands using the mouse or by pressing
the key corresponding to the letter shown on the button. See Figure 28.
Figure 28 - Main Window
Menu Bar
Terminal
Window
Commands
Window
Status Bar
