CONNECTIONS
2 CONNECTIONS
CAUTION
Physical connections should always be made with power
OFF!
2.1 USB
CONNECTION
The Datalogic Memor™ Single Ethernet Cradle can be connected to the host by
means of any standard Mini USB cable.
Once the host has been turned on, insert the Datalogic Memor™ mobile
computer into the cradle.
A
C
B
D*
Figure 4 - USB Connection
A) Host Computer
C) Datalogic Memor™ Single Ethernet
Cradle
B) Std Mini USB (i.e.
94A051016 CAB-421)
D) Power
Supply
(only necessary for
battery charging)
NOTE
Be sure that the switch is in the “USB” position.
During the switch operation from USB position to Ethernet
position and vice versa the mobile computer must not be
inserted in the cradle.
∗
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC POWER SUPPLY
EU/USA PLUG.
4