STAR-BOX™
14
2
Figure 14 - Connection Jumper Settings
2.6.2
RS485 Bus Termination
Converter Mode
: In this case STAR-Box™ is connected to the Host and therefore
should be terminated as the first device on the network bus. Only jumper J1 should
be inserted to terminate the RS485 bus.
Repeater Mode
: In this case STAR-Box™ divides the RS485 network bus and
therefore should be terminated both as the last device and as the first device on the
network bus. Both jumpers J1 and J4 should be inserted to terminate the RS485 bus.
Figure 15 - RS485 Bus Termination Jumpers
Summary of Contents for STAR-Box
Page 1: ...STAR Box Installation Manual ...
Page 2: ......