87
APPENDIX B: STANDARDS
LASER STANDARDS
The marking system is designed to comply with the applicable sections of these laser standards:
EU : EN60825-1
USA : 21 CFR 1040.10
China: GB7247-1
The marking system is classified as Class 4 Laser Product.
Datalogic, as manufacturer of marking system, provides a laser which is NOT intended for immediate use,
but it must be connected, by others, to other devices which have the final aim of creating a laser processing
system.
The final system manufacturer MUST ensure the safety of the laser processing machine according to its
standards including the risk-analysis, implementation of safety measures, certification and testing of safety
measures and the production of adequate information for use of the machine.
Datalogic is available for providing to the system integrator/OEM all the information in its possession to help
in complying with applicable standards.
CE COMPLIANCE
CE marking states the compliance of the product with essential requirements listed in the applicable
European directive.
Since the directives and applicable standards are subject to continuous updates, and since Datalogic
promptly adopts these updates, therefore the EU declaration of conformity is a living document.
The EU declaration of conformity is available for competent authorities and customers by Datalogic
commercial reference contacts.
Since 20
th
April 2016 the main European directives applicable to Datalogic products require to include an
adequate analysis and assessment of the risk(s). This evaluation was carried out in relation to the applicable
points of the standards listed in the Declaration of Conformity.
Datalogic products are mainly designed for integration purposes, into more complex systems. For this reason
it is under the responsibility of the system integrator to do a new risk assessment regarding the final
installation.
WARNING!
This is a Class A, Group 2 product according EN55011. In a Class B environment this product may
cause radio interference in which case the user may be required to take adequate measures.
FCC COMPLIANCE
Modifications or changes to this marking system without the expressed written approval of Datalogic could
void the authority to use the system.
This system complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This system may not cause harmful interference, and (2) this system must accept any interference
received, including interference which may cause undesired operation.
This marking system has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the system is operated in a commercial environment. This marking system
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this marking
system in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Summary of Contents for VLASE IR 1PWX-TLS2
