2. Commands
All commands must be followed by a carriage return (ENTER).
Main Command/settings Function
*d
Detect: returns the UID-list of all the HF transponders in the field
*i
Interrupts any continuous mode operation
*x
List of the commands and settings
*se
Settings: Displays the current settings
*rd
Restore
default
settings
*sa1
Standalone
mode
on
*lc2
Lock-code
on
B. Ethernet
1. Configure your LAN Internet Protocol entering the following IP address (possibly in the
Alternate Configuration): 192.168.0.1
2. Open a web browser (Internet Explorer, Firefox, etc.) and type http://192.168.0.85 (or the IP
that you have configured) in the address bar. The login-page of the reader authorizes the access
to the configuration-, monitoring- and administrator- tools.
The default accounts are defined as follows, passwords can be changed.
User:
user1
Password: 1234
3. The monitor tab is used to verify whether the reader is activated or not.
The “Start Reader” button makes the reader start its inventory cycles.
The “Stop Reader” button makes the reader suspend its reading process.
The “Start Monitoring” button permits to display the UIDs of the chips found by the reader.
The “Clear Result” button clears the UIDs display.
The “Stop Monitoring” button stops the display.
The led “D” (detection) is green if the reader sends UIDs, red otherwise
R-IN1300 MID – UM001061 –
v.
3.0
– January 2019
2 (
5
)
