6 Take care of your reader
Ensure that the reader does not get damaged. Do not drop it onto a hard surface or subject it to very
wet conditions.
If the outer casing of the reader becomes soiled it can be cleaned with a slightly humid cloth. First
ensure that it is not connected to the charger.
If for any reason the reader is not working, please do not attempt to repair it, but return it for repair to
your local dealer.
The R-PO7470 reader is equipped with a Li-ion type battery. This battery lasts longer, does not
contain Cadmium or lead, which makes it much safer for the environment. If the reader is to be
destroyed, please return it to a battery specialist, for battery recycling.
The display of the reader R-PO7470 may change colour if exposed to temperatures higher than 50°C.
It will return to its original colour as soon as the temperature gets below 50°C.
At very low temperatures the display may lose its contrast but at normal temperatures it will return to
the normal contrast.
7 Specifications
1. Storage temperature: -40 to +70 °C, 95% RH, non condensing.
2. Operating temperature while battery under charge: 0 to +40 °C, 95 % RH non condensing.
3. Normal operating temperature: -5 to +50 °C, 95% RH non condensing.
4. Housing material: ABS UL94-HB.
5. External power supply (battery charger): Input: 100 to 240 VAC. Output: 15 VDC, 1A.
6. Dimensions: 330x160x40 mm3.
7. TAG compatibility: T-BT 7700; T-BT 7711; T-BT 7720; T-BT 7755; T-BH 7550; T-IA 7711
Datamars Low Frequency Single Read transponder only
8. Transmission frequency: 110 KHz.
9. Battery life: >500 cycles.
10. Weight: 450g (TBD).
11. IP40 (protection against dust, no protection for liquid).
12. Interfaces to host PC: USB and BLUETOOTH.
R-PO7470 Manual – v. 1.1 – August 2008
22
