9.4.13 Gets the current time
•
Command
syntax:
“?TM”
[CR]
•
Command answer:
[CR][LF] ”TM=14.58.45” [CR][LF]
•
Command action:
Gets the current time
•
Parameter
range:
none
Description: this command retrieves the current time.
9.4.14 Clears the memory’s data
•
Command
syntax:
“.rX”
[CR]
•
Command
answer:
[LF]
•
Command action:
Clears the memory’s data
•
Parameter
range:
none.
Description: this command clears the memory’s data.
9.4.15 Downloads the memory’s data
•
Command
syntax:
“.rF”
[CR]
•
Command answer:
[CR][LF] ” D004815B5E” [CR][LF]
[CR][LF] ” D0048A1B5E” [CR][LF]
[CR][LF] ” D00481C51” [CR][LF] …
•
Command action:
downloads the memory’s data
•
Parameter
range:
none.
Description: this command downloads the memory’s data. If no data is stored in the memory, then the
answer is: [LF] [BEL].
9.4.16 Clears the message area
•
Command
syntax:
“.m0”
[CR]
•
Command
answer:
[LF]
•
Command action:
clears the message area
•
Parameter
range:
none.
Description: this command clears the message area
on
the display.
9.4.17 Write a message to the display
•
Command syntax:
“.m#” [**max 15 char**][CR]
•
Command
answer:
[LF]
•
Command action:
writes a message to the display at the row #
•
Parameter range:
#= 1 to 3.
Description: this command writes a message to the display at the row #. The message string has to be
a maximum of 15 characters. The message can be written on row 1, 2 or 3 on the display.
R-PO7470 Manual – v. 1.1 – August 2008
27