3
1
Before you start
TracKing-1_EN_FR_ES_IT v.3.0
2
TracKing-1_EN_FR_ES_IT v.3.0
3
This guide provide
s
you
the basic information to start using your TracKing-1
to read
electronic identification
codes (EICs). For additional information on
the reader
functionalities
,
please refer to Datamars website
www.datamars.com
We recommend to fully charge the battery before
the
first usage
of the reader.
To charge the battery, p
lug
t
he USB cable into the corresponding connector on the bottom of the reader and connect it to a PC or a
wall mount adapter with USB plug.
Display
Softkeys
Press these two buttons to
select the commands
above them in the action
toolbar
Mini USB
communication port
2
Home menu
A
ctive screen when the reader is switched on
.
EIC counter:
shows how many EICs are stored in the last session
selected.
Session file
: it's a
memory
file where the EICs read are stored. The file is named with date and time at the
creation of the session. The home menu shows the name of the last
session
file
selected
.
3
Reading
Press the "ON"/Reading button to
start reading.
When a tag is
successful read, the
display will show the EIC detected
(see figure
above
)
.
In continuous reading mode the
reading icon will be shown on the
display until you stop reading.
4
Sessions menu
EICs counter
Sessions menu
Reading
Settings menu
Date and time
Session file
Bluetooth icon (optional)
Supported USB interface
Continuous reading icon
Transponder type + field bit info
EIC country code
National
i
dentification
c
ode
Reading in process
Battery level
Position of the
session
file in the
session
s
menu
Number of EICs stored in the
selected
session
file
Total
number of
EICs
registered
in
the reader
(up to 4000)
Select the sessions menu icon to have all the sessions files recorded shown on the display.
Select the arrow icon to move from a session file to the following. A longer press will reverse the arrow
direction.
Select the icon
to enter the desired session file and review all the EICs recorded in that session
(see next figure).
Select the home icon to return to the home menu.
Antenna
(
o
n the back of the reader)
"ON"/Reading button
Press this button to turn
the reader ON and start
reading.
With the reader on, press
this button to select the
commands above it in the
action toolbar.
Press and hold this button
to turn the reader off
