Datamaster
®
T0046 Professional LAN Cable Tester – User Guide
Page 13
Enter LENGTH Mode from either the main menu on the screen or by pressing the blue
coloured
LENGTH
button.
Use the
UP / DOWN NAVIGATION
keys to toggle between LAN Cable & COAX Cable
tests.
11.1
LENGTH MODE – LAN CABLE
Use the
UP / DOWN NAVIGATION
keys to toggle between LAN and COAX Length Modes.
The initial screen is shown opposite.
Push either the
LENGTH
key or the
TEST
key
to start the test.
If a Remote Terminator is connected to the far
end of the cable, the test cannot be performed
and an error message advising you to keep
the remote end of the cable open is shown.
Remove the Remote Terminator and re-test.
The length (± 5%) of Pair 1 (in this example
23.8 metres) will displayed.
Use the
LEFT / RIGHT NAVIGATION
keys to
see the test result for another pair. It is usual
to see slightly different results for each pair in
the same cable.