Datamaster
®
T0046 Professional LAN Cable Tester – User Guide
Page 3
3.1
To set the UNIT:
Select Option 1
UNIT
from the SETUP menu.
The current selection will be blinking.
3.2
To set the LAN Length Adjustment:
Connect a known length of cable (eg 100 metres) to the
MAIN
socket as shown in the drawing leaving the other end unterminated.
Select Option 2
LAN Length Adj
from the SETUP menu
Push the
TEST
key.
A result will be displayed as shown:
Use the
LEFT / RIGHT NAVIGATION
keys to adjust the value to the known length.
Press the
MEMORY
key to save the value.
3.3
To set the COAX length adjustment:
Connect a known length of cable (eg 100 metres) to the
COAX
socket as shown in the drawing leaving the other end unterminated.
Select Option 3
COAX Length Adj
from the SETUP menu
Push the
TEST
key.
A result will be displayed as shown:
Use the
LEFT / RIGHT NAVIGATION
keys to adjust the value to the known length.
Press the
MEMORY
key to save the value
Use the
LEFT / RIGHT NAVIGATION
keys to select an option. The selected option will blink.
Press the
MEMORY
key to save the value.
