A-Class
35
4.2.2 Print Control
The Print Control menu contains print quality, throughput and formatting functions:
Menu Item
Details
HEAT
Controls the burn-time of the printhead
(selectable as “Heat” in most labeling programs),
where:
(0 – 30)
10
Is the number based on duration, corresponding
to print darkness.
PRINT SPEED
Controls the rate of label movement during
printing, where:
XX.X in/sec
Is the speed; see Appendix B for the model
dependant default and range.
Slower rates may be needed for detailed
images, while faster rates may require an
increased HEAT setting for sufficient energy
transfer.
FEED SPEED
Controls the rate of label movement between
printing areas, where:
XX.X in/sec
Is the speed; see Appendix B for the model
dependant default and range.
REVERSE SPEED
Controls the rate of label movement during
backup positioning, where:
X.X in/sec
Is the speed; see Appendix B for the default and
range.
SLEW SPEED
Controls the rate of label movement between
printing areas when using the optional Applicator
Interface Card’s GPIO function, where:
XX.X in/sec
Is the speed; see Appendix Bfor the default and
range.
ROW OFFSET
Shifts the vertical SOP position on the label,
where:
(0 – 99.99 in.)
00.00
Is the offset distance; see Section 7 for label
details.
COLUMN OFFSET
Shifts the horizontal, left-justified SOP position to
the right without shifting the Label Width
termination point to the right, where:
(0 – 99.99 in.)
00.00
Is the offset distance; see Section 7 for label
details.
Summary of Contents for A-Class Mark II
