4
Step 1: Preparing the Printer
A)
Turn ‘Off’ the
Power Switch
, unplug the
power cord from the
AC Receptacle
,
disconnect all interface cables and, if
necessary for total access, remove the
printer from the applicator system.
B)
Raise the
Access Cover
and the
Head
Lift Lever.
Remove any media from the
printer then lower the
Head Lift Lever
.
Power Switch
Access Cover
AC
Receptacle
Head Lift Lever
C)
If the
Warning Label
covers the Cable
Receiver in the
Access Cover
, remove
the
Warning Label
. (For the Cable
Receiver’s location, see the illustration in
Step 2, part C.)
Warning
Label
Access
Cover
D
)
Remove the following items from the
Card
Cage
:
Remove the two
Card Cage Cover
Screws
then remove the
Card Cage
Cover
;
Remove the two
Main Logic CCA
Screws
then remove the
Main Logic
CCA
; and,
Remove the two
Applicator Interface
CCA Screws
then remove the
Applicator
Interface CCA
.
Main Logic
CCA
Card Cage
Cover Screws
(2 places)
Main Logic
CCA Screws
(2 places)
Applicator
Interface CCA
Screws
(2 places)
Card Cage
Cover
Applicator
Interface CCA
Card Cage