Datamax I-Class, Quick Start Manual

2 

Installing the Thermal Transfer Assembly



  Position the Thermal Transfer Assembly in 

the printer as shown and secure using the 
three provided Screws.

Setup and Configuration

 
In order to use thermal transfer printing the printer must be loaded with ribbon and the ‘Select Media 
Type’ menu function must be set to ‘Ribbon Transfer’.  For proper loading of ribbon see the ‘Ribbon 
Loading’ instructions in the Operator’s Manual.  Follow the steps below to set the printer to ‘Ribbon 
Transfer’.    
 



Verify the printer is in the ‘Ready Mode’



Press the                    button.  The ‘Select 
Media Type’ menu function should be 
displayed, press the       button.



  Using the       button scroll to ‘Ribbon 

Transfer’.  Press the       button to select the 
displayed setting, an asterisk will appear to the 
left of the setting indicating that it is selected. 



  Once you have selected the desired setting 

press the        button repeatedly until the ‘Save 
Changes’ message is displayed.  Press the 

button to save the changes or the        button to 
discard the changes.